Services
Imported and domestic natural stone slab and tile. Stocked in New Jersey and available for shipment anywhere. Most materials may be special ordered for larger projects to meet thickness and finish requirements.
CUSTOM FABRICATION
CNC custom milling and processing available in most materials.
Special finishes and textures on any stone.
High quality stone detailing of large eliptical ovals, dimensional stone cornices.
laminated mitered edges, assembled niches, mitered shower curbs and other stone accessories.
CUT TO SIZE
Each stone is available cut to size and packed according to project specifications.
Imported projects supplied from quarry to jobsite.
State of the art fabrication facility in Moonachie, NJ.
CCS Stone is an MIA Accredited fabrication facility.
Stone Types
Marble
One of the most beautiful and popular stones. Marble can be used for kitchen, bathroom or any other interior or exterior projects.
Limestone
Limestone is one of dozens of natural stones we work with. This stone is especially good for buildings, sinks, pools, sills, ornamentals, interior, exterior, wall, floor, paving and other design projects.
Granite
Granite is used in many outdoor and indoor projects. Outdoor projects like bridges, monuments, buildings, paving etc. Indoor projects like countertops, floors etc.
Slate
Slate is popular for a wide variety of uses such as roofing, flooring, and flagging because of its durability and attractive appearance.
Travertine
Travertine adds a touch of class to the places. It can be used in a number of places both inside and outside.
Project Gallery
GLASSOS® surfaces are hard dense and virtually maintenance free. Made from the finest minerals, using the most advanced manufacturing technology, GLASSOS® is formed at high temperature without the use of resins or harmful chemicals. GLASSOS® will not scorch and will never yellow over time. Uses include flooring, walls and other interior or exterior applications where a resilient pure or veined white material is required. In addition to polished finish GLASSOS® we have our exclusive SATIN Textured finish.
Sizes and availability – Slabs are produced in nominal dimensions of 64” x 112 x 3/4” Cut to size tolerances on dimension are +/- 1/16” on slab. The back of the slabs may have some irregularities from the manufacturing process. Calibration may be required to get a uniform thickness on the edge.
Applications – Walls, floors, counter tops, vanity tops, shower jambs, sills, niches, saddles and exterior panels. Suggested Minimum Joint Width and allowances – Interior horizontal countertop seams up to 25” deep require a joint space of 1/32” min, 1/16” -1/8” joint when greater than 25” deep. Interior vertical panels up to 25” minimum require a joint space of 1/16” – 1/8”, 1/8” -1/4” when greater than 25” deep. Suggested minimum exterior joint width 7/16”. There must be a minimum 4” setback for all sink and cook top cut outs. All inside corners including sink cutouts, cook top cut outs, outlets, bump outs and notches must have a minimum ½” inside radius corner.
Satin Texture – GLASSOS® STATUARY is stocked in a polished finish and available in GLASSOS® Satin Texture. Satin Texture is a matte finish that removes the polish and increases the coefficient of friction on GLASSOS® products for nonslip requirements. The treatment is available on tile, cut to size projects and full size slabs.
Installation – For seams and mitered laminations on GLASSOS® STATUARY use matching acrylic epoxy cartridges from professional product suppliers. Counter tops and other interior horizontal surfaces may be installed using Silicone® adhesive. Vertical surfaces may be installed using White Portland Cement such as Laticrete® Platinum or Latapoxy® for exterior and wet areas. Care and Maintenance – No sealer required for GLASSOS® STATUARY polished or satin finishes. GLASSOS® will never yellow or stain. Clean with a soft cloth or paper towel using glass cleaner . Don’t use abrasive household surface cleaners or abrasive sponges. Avoid placing heavy or abrasive objects on the surface without adequate protection. Always use a cutting board and trivet.
Sizes and availability – Slabs are produced in nominal dimensions of 64” x 112 x 3/4” Cut to size tolerances on dimension are +/- 1/16” on slab. The back of the slabs may have some irregularities from the manufacturing process. Calibration may be required to get a uniform thickness on the edge.
Applications – Walls, floors, counter tops, vanity tops, shower jambs, sills, niches, saddles and exterior panels. Suggested Minimum Joint Width and allowances – Interior horizontal countertop seams up to 25” deep require a joint space of 1/32” min, 1/16” -1/8” joint when greater than 25” deep. Interior vertical panels up to 25” minimum require a joint space of 1/16” – 1/8”, 1/8” -1/4” when greater than 25” deep. Suggested minimum exterior joint width 7/16”. There must be a minimum 4” setback for all sink and cook top cut outs. All inside corners including sink cutouts, cook top cut outs, outlets, bump outs and notches must have a minimum ½” inside radius corner.
Satin Texture – GLASSOS® STATUARY is stocked in a polished finish and available in GLASSOS® Satin Texture. Satin Texture is a matte finish that removes the polish and increases the coefficient of friction on GLASSOS® products for nonslip requirements. The treatment is available on tile, cut to size projects and full size slabs.
Installation – For seams and mitered laminations on GLASSOS® STATUARY use matching acrylic epoxy cartridges from professional product suppliers. Counter tops and other interior horizontal surfaces may be installed using Silicone® adhesive. Vertical surfaces may be installed using White Portland Cement such as Laticrete® Platinum or Latapoxy® for exterior and wet areas.
Care and Maintenance – No sealer required for GLASSOS® STATUARY polished or satin finishes. GLASSOS® will never yellow or stain. Clean with a soft cloth or paper towel using glass cleaner . Don’t use abrasive household surface cleaners or abrasive sponges. Avoid placing heavy or abrasive objects on the surface without adequate protection. Always use a cutting board and trivet.
Sizes and availability – Slabs are produced in nominal dimensions of 64” x 112 x 3/4” Cut to size tolerances on dimension are +/- 1/16” on slab. The back of the slabs may have some irregularities from the manufacturing process. Calibration may be required to get a uniform thickness on the edge.
Applications – Walls, floors, counter tops, vanity tops, shower jambs, sills, niches, saddles and exterior panels. Suggested Minimum Joint Width and allowances – Interior horizontal countertop seams up to 25” deep require a joint space of 1/32” min, 1/16” -1/8” joint when greater than 25” deep. Interior vertical panels up to 25” minimum require a joint space of 1/16” – 1/8”, 1/8” -1/4” when greater than 25” deep. Suggested minimum exterior joint width 7/16”. There must be a minimum 4” setback for all sink and cook top cut outs. All inside corners including sink cutouts, cook top cut outs, outlets, bump outs and notches must have a minimum ½” inside radius corner.
Satin Texture – GLASSOS® CALACATTA is stocked in a polished finish and available in GLASSOS® Satin Texture. Satin Texture is a matte finish that removes the polish and increases the coefficient of friction on GLASSOS® products for nonslip requirements. The treatment is available on tile, cut to size projects and full size slabs.
Installation – For seams and mitered laminations on GLASSOS® CALACATTA use matching acrylic epoxy cartridges from professional product suppliers. Counter tops and other interior horizontal surfaces may be installed using Silicone® adhesive. Vertical surfaces may be installed using White Portland Cement such as Laticrete® Platinum or Latapoxy® for exterior and wet areas.
Care and Maintenance – No sealer required for GLASSOS® CALACATTA polished or satin finishes. GLASSOS® will never yellow or stain. Clean with a soft cloth or paper towel using glass cleaner . Don’t use abrasive household surface cleaners or abrasive sponges. Avoid placing heavy or abrasive objects on the surface without adequate protection. Always use a cutting board and trivet.
GLASSOS® CALACATTA EXTRA
Product Description – GLASSOS® CALACATTA is a sintered quartz surface material made from a proprietary blend of quartz powder and other fine minerals. GLASSOS ® CALACATTA is a solid body material and it is fused together using only intense high temperature. No resins or epoxies are used in the process.
Sizes and availability – Slabs are produced in nominal dimensions of 64” x 112 x 3/4” Cut to size tolerances on dimension are +/- 1/16” on slab.
Applications – Walls, floors, counter tops, vanity tops, shower jambs, sills, niches, saddles and exterior panels.
Suggested Minimum Joint Width and allowances – Interior horizontal countertop seams up to 25” deep require a joint space of 1/32” min, 1/16” -1/8” joint when greater than 25” deep. Interior vertical panels up to 25” minimum require a joint space of 1/16” – 1/8”, 1/8” -1/4” when greater than 25” deep. Suggested minimum exterior joint width 7/16”.
Satin Texture – GLASSOS® CALACATTA is stocked in a polished finish and available in GLASSOS® Satin Texture. Satin Texture is a matte finish that removes the polish and increases the coefficient of friction on GLASSOS® products for nonslip requirements.
Installation – For seams and mitered laminations on GLASSOS® CALACATTA use matching acrylic epoxy cartridges from professional product suppliers. Counter tops and other interior horizontal surfaces may be installed using Silicone® adhesive.
Care and Maintenance – No sealer required for GLASSOS® CALACATTA polished or satin finishes. GLASSOS® will never yellow or stain. Clean with a soft cloth or paper towel using glass cleaner . Don’t use abrasive household surface cleaners or abrasive sponges.
Glassos® Crystal White is the purest crystallized glass available.
Glassos® is made using a proprietary process of sintering glass crystals, then fusing them together under intense heat.
The result is a versatile building material that is nearly identical to Thassos White Marble,
yet unlike Thassos it is as hard as granite with zero porosity.
Glassos® Crystal White is available in both polished and Satin Texture finishes
GLASSOS® NANO White is a superior quartz based surface material made from a proprietary blend of quartz powder and other fine minerals.
Advanced technology is used to fuse the mixture together at high temperature forming pure white slabs of extreme hardness and classic beauty.
Glassos® Satin Texture matte finish for increased slip resistance
GLASSOS® COLORS
available as long as there is inventory
GLASSOS® DARK BLUE
GLASSOS® DELICATO
GLASSOS® SIENNA
GLASSOS® BAMBOO
GLASSOS® products
GLASSOS ® Slabs
GLASSOS ® Tiles and Trim
GLASSOS ® Satin Texture
GLASSOS® Nano White Slabs
Multiple sizes available
GLASSOS® Crystal White Slabs
Multiple sizes available
Glassos® Chair Rail and Pencil
Glassos® Crystal White Mosaic and Subway Tile
Transform any polished Glassos® tile or slab into a textured surface
Satin Texture for increased slip resistance and design flexibility
About US
CCS Stone
9-11 Caesar Place, Moonachie, NJ 07074
Tel: 201-933-1515 or 800-227-7785
ABOUT US
CCS STONE has been family owned and operated since 1963.
Dedicated to the highest standards of quality and dependability,
CCS STONE, Inc. has earned a respected position in the stone community.
CCS STONE, Inc. imports only the highest quality materials from the finest factories and quarries worldwide.
CCS STONE, Inc. is the exclusive supplier of GLASSOS® Crystal White and GLASSOS® Nano White surfaces. GLASSOS® is a registered trademark of CCS STONE, Inc. and the most recognized name in crystallized glass.
Industry professionals depend on CCS Stone, Inc. for their natural, engineered and GLASSOS® requirements.
The company inventories hundreds of materials in New Jersey including slabs, tiles and custom fabricated projects.
The 40,000 sf facility has five overhead cranes and is equipped with a state of the art fabrication shop.
OBJECTIVES
CCS STONE, Inc.is the first marble shop in New Jersey accredited by the Marble Institute of America,
CCS STONE, Inc. is dedicated to providing the highest standards of quality and service to its customers. The company uses advanced stone working technology while maintaining environmentally conscious processes in the production, handling and packing of its products. CCS STONE, Inc. welcomes trade clients and their customers to view materials in its modern, fully craned indoor facility. The warehouse is clean and safe, with natural light for optimal viewing of stone. Active in the stone community, CCS STONE, Inc. has been a member of the MIA since 1985.
As committee chair for the MIA safety committee CCS Stone, Inc. is committed to educating colleagues in stone safety and responsible practices.
CCS STONE and THE ENVIRONMENT
CCS STONE, Inc. is concerned about the environment.
We operate a dustless shop with no airborne siliceous particles, creating a safe and healthier environment for our workers and neighbors. Recycled water is used for cutting and processing, while stone debris is collected in dumpsters and used in the production of asphalt for roadways. Our natural stones are certified by the MIA to be safe from harmful radon and dangerous chemicals. Instead of using freshly cut trees from a lumberyard, CCS STONE, Inc. builds crates in New Jersey from only 100% recycled wood. Samples are cut from post consumer waste whenever possible and packed with shredded paper documents for protection.